In order to ensure the measurement accuracy, the daily use and maintenance of the measuring instrument of the air momentum meter should pay attention to the following points:
    1.It is not allowed to touch the measuring surface of the air gauge with your hands, because there is usually wet dirt such as sweat on your hands that will contaminate the measuring surface and cause it to rust. The measuring tool should not be mixed with other tools and metal substances to avoid damage to the measuring tool.
    2.After using the measuring tool, it is necessary to carefully wipe the surface of the stain, aluminum debris, loosen the fastening device, when long-term (1When not in use, it is necessary to apply anti-rust oil on the measuring surface. At the same time, it should be put into the protective box, which is used full-time by a special person, and do a good job of the annual audit records of the measuring tool tested by the unit.
    3.Do not use the caliper measuring claws as markers, compasses or other tools, do not artificially twist the two clamping claws or use the measuring tools as clamping plates.
    4.It is not allowed to use oil stone, emery cloth to rub the surface of the measuring tool and the measuring surface and the marking part. Personnel who are not measurement maintenance are strictly prohibited to disassemble, modify and repair the measuring tool.

    5.The place where the measuring tool is stored should be kept clean and dry, free from vibration and corrosive gases, and away from places with large temperature changes or magnetic fields. The measuring tools stored in the measuring tool box should be kept clean and dry, and no other debris should be stored.

    As a precision parts size pneumatic measurement equipment manufacturer, we have19+Years design experience engineer, can provide a variety of measurement solutions, the production of pneumatic probe using German imported steel, to ensure the real material, through the original salt bath heat treatment, high temperature1500°Quench, wear proof, liquid nitrogen-180°Deep cooling to remove internal stress, prevent deformation, manual grinding, ensure micron accuracy.
    If you're on billion leride Pneumatic probe Interested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline 400-682-7787. We look forward to hearing from you!