When users want to maintain the air momentum meter measuring device, they must pay attention to the following6Points:
    First, do not touch the probe and the normal working surface directly by hand, so as not to cause rust.
    Second, when using, the probe should be placed in a stable place, such as the table of the tool cabinet or the wooden cushion plate of the stationary part of the machine tool, and can not be placed on the tool holder or the guide rail of the machine tool, so as to avoid falling and causing damage.
    Third, check the outside regularly to see if there is damage, rust or deformation.
    Fourth, do not put the two regular working surfaces together to save, but not put the probe in the normal inside, otherwise the two working surfaces will be glued to each other, and the external force will be separated by unnecessary damage.
    Fifth, after the probe and calibration are used, they should be wiped with clean cotton yarn or soft cloth, placed in a special box, and then stored in the tool cabinet.

    6. The place where the probe is kept and calibrated must be dry.

    As a precision parts size pneumatic measurement equipment manufacturer, we have19+Years design experience engineer, can provide a variety of measurement solutions. The pneumatic probe produced by the use of German imported steel, to ensure the real material, after the original salt bath heat treatment, high temperature1500°Quench, wear proof, liquid nitrogen-180°Deep cooling to remove internal stress, prevent deformation, manual grinding, ensure micron accuracy.
    If you're on billion leride Pneumatic probe Interested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline 400-682-7787. We look forward to hearing from you!