Different pneumatic probe with the use of air momentum meter, you can measure the outside diameter, inside diameter, depth, taper, straightness and other dimensional parameters, and as the main measuring part, the pneumatic probe is easy to wear during use, resulting in inaccurate measurement accuracy, the following kinds of staff need to pay more attention:
    1The use frequency is too high
    No matter what kind of mechanical parts, the frequency of use is too high, there will be different degrees of failure. Too many times per day will cause pneumatic probe wear, with the increase in the frequency of use, the probe wear faster.
    2Wipe before use
    Some workers may wipe the pneumatic probe before using it to improve the measurement accuracy. In fact, wiping the probe before use will affect the accuracy, but also make the probe surface and the surface of the workpiece wear, especially some workpiece surface there are still abrasive agents, will aggravate the wear.
    3Workpiece surface pollution
    Some parts to be measured will be ground before the measurement step, which will make the workpiece after grinding with certain impurities particles, which is a kind of pollution to the workpiece, these particles will cause certain wear of the pneumatic probe.
    4The workpiece has not stopped
    Some workpieces may need to be measured directly at the production site for some reason. During this measurement process, if the workpiece is not stopped and measured directly with the pneumatic probe, the impurities on the workpiece surface may scratch the probe, causing the probe to wear.

    As a precision parts size pneumatic measurement equipment manufacturer, we have19+Years design experience engineer, can provide a variety of measurement solutions, the production of pneumatic probe using German imported steel, to ensure the real material, through the original salt bath heat treatment, high temperature1500°Quench, wear proof, liquid nitrogen-180°Deep cooling to remove internal stress, prevent deformation, manual grinding, ensure micron accuracy.

    If you're on billion leride Pneumatic probe Interested or want to know more details, please click on our online customer service for consultation, or directly call the national unified service hotline   400-682-7787 . We look forward to hearing from you!